Slimming Firming Skin Multifunctional Hifu Machine

4 in 1 HIFU Machine

This HIFU machine has successfully realized the benefits of "one machine with multiple functions".

It has four handles (carved head, gold micro-needle, private ultrasonic knife, Thermal plastic). It can be used to treat wrinkles and skin rejuvenation on the face, and it can also be used to slim down the body and tighten the vagina.

Gold Micro Needle Before and After Treatment

Gold micro-needle is currently a relatively advanced dermatological treatment method. It can effectively treat wrinkles, crow's feet, forehead lines, nasolabial folds and stretch marks, etc. It can also be used for the treatment of acne pits and acne marks, and it can tighten the skin. effect. The treatment effect is very good.

Introduction Of Gold Microneedle

10-needle, 25-needle, 64-needle: You can choose probes with different densities to introduce essence/liquid products into subcutaneous tissue, accelerate cell activity, regenerate collagen, increase skin elasticity and tighten skin.

Microcrystalline head: opens the skin water protein channel and activates the skin vitality.

Gold microneedle is equipped with 4 probe models, and you can choose different density probes by yourself, with high flexibility and larger operating area.

Before and After Hifu Thermal Plastic Weight Loss Treatment

The effect of thermal plastic weight loss is more obvious. Thermal plastic weight loss uses high-density ultrasonic energy to directly reach the subcutaneous fat layer without penetrating and harming the skin, and dissolves excess fat. After recovery, it can make the body look more slender Slim, and the effect is relatively long-lasting. In addition, after this kind of operation, there is generally no need for special rest, and the recovery period is relatively short.

(1) Pick up the fat in the skin care part by hand, and judge whether the fat thickness is more than 1.0cm, and whether it is suitable for the operation of thermoplast. Select the corresponding treatment probe according to different fat thickness.

⑵ Clean the skin;

⑵ Take photos before operation so that they can be compared after nursing. Generally, three parts of the umbilicus are measured: the upper, middle and lower umbilicus. The measured positions are marked with a cosmetic pen, the measured dimensions are registered, and photos are taken.

(4) Use a cosmetic pen to square out the treated part for treatment. Apply gel to the treatment site.

(5)Enter the operation interface of thermoforming, adjust the energy intensity and working mode, and press the start button on the screen.

(6) When the instrument is in a ready state, the beautician presses the probe against the skin, then presses the operation key on the handle, and the current working points of the system begin to count down. The probe can't be moved in the working launch state, and then move to the next position after the energy launch! When the current working point number is displayed as "0", it means that the launch is finished. (The blue light is always on when emitting energy).

⑺ If you need to pause during work, press the pause button on the handle to pause the energy output; If the [Pause] button on the host screen is pressed, the motor will be reset when the instrument stops working.

(8)Being in the process of operation, you must adhere to the skin without any gaps, and ensure that the gel is fully uniform.

⑼ In the process of operation, it is necessary to constantly ask the experiencer about the adjustment of comfort and energy, so as to ensure that the experiencer accepts the experience in a pleasant state.

⑽ If you feel that the energy intensity is not enough, you can add it slowly until the customer can accept it. It is normal for the customer to feel a slight tingling or slight heat. Slight redness of skin after operation is a normal phenomenon, because the energy generated by fat cells in the bottom layer of skin after heat production is discharged to the surface layer of skin.

⑾ After the operation, clean the working handle and probe with a soft cloth and put them back on the working handle frame.

⑿ Measure the size of the part after nursing and take pictures of the effect after operation. Measure the upper, middle and lower umbilicus, and the measured positions should be consistent with those measured before operation.

Carved Beauty

The benefit of the facial carved head is that it can make the skin firmer and improve the symptoms of sagging skin, and it can also stimulate local collagen proliferation. Facial fine carving is a relatively common beauty method, mainly to do fine carving on the face, which can stimulate local collagen hyperplasia. But choose a regular medical institution to operate.

Carved head function introduction

There are three types of probes for the carved head. The probes are fine and compact, and the mobile operation flexibility is high. The single-point output mode is suitable for precise anti-aging of small parts, anti-aging of orbit and local strengthening operation.

1.5: The energy goes directly to the dermis layer, which makes the fibrous tissue densely arranged in a network and makes the skin smooth and delicate.

3.0: Energy directly reaches the subcutaneous tissue of the skin, accelerates cell activity, regenerates collagen, increases skin elasticity and tightens skin.

4.5: The energy directly reaches the fascia layer, which makes the thermal solidification of the fascia layer produce tension and lift to achieve the effect of suspending and lifting the fascia layer, so that the skin can improve the subcutaneous structure that supports the skin from deep to shallow, better help the bottom layer of the skin recover its elasticity, tighten and remove wrinkles and lift the facial skin.

Vaginal Contraction Treatment

The private ultrasonic knife utilizes the heat effect contraction produced by the instrument on the mucous membrane layer and fascia layer of the vaginal wall, theoretically solving the problems of mild vaginal relaxation and urinary incontinence. After the private ultrasonic knife is done, the skin cells rely on the repair ability to repair themselves better, and can lift and tighten the skin of the private parts as a whole.

Ultrasonic Scalpel For Private Parts

There are two probe models of private ultrasonic scalpel, with two different depths. It can accurately control automatic rotation and output energy. When operating, it should avoid the upper part of urethral orifice, which is safer and more efficient.

DL-3.0: Accelerating cell activity makes collagen regenerate and recombine, firming and increasing elasticity.
DL-4.5: Thermal coagulation produces tension to achieve the effect of fascia suspension and skin lifting, which can improve the subcutaneous structure of the skin from deep to shallow, and better help the bottom layer recover elasticity and firmness.

Most Effective Hifu Machines

The new hifu machine involves delivering short, high-intensity pulses of ultrasound into the patient's skin.
This heats the deeper layers of the skin and causes a small amount of damage to these tissues.
It is one of the most commonly used treatments in aesthetic medicine.
When the body realizes that these deep skin tissues need repair, it produces extra collagen to help the cells regenerate.
Collagen is the substance that keeps skin firm and smooth, so this extra collagen boost allows for a facelift without any risk or painful surgery.

Best Hifu Machine for Face Lift

It is completely normal for the treated area to feel a little soft, slightly swollen, flushed, or hot to the touch. To help relieve these mild side effects, treat the area as follows:
Do not use ice packs as this will reduce the effectiveness of the treatment
Avoid tweezers, waxes and hair removal creams for at least 3 days after treatment
Avoid hot tubs, saunas, steam rooms, and strenuous exercise for a few days.
Use only a light exfoliator and moisturizer on the day of treatment, but resume your normal skin cleansing and care routine afterwards.
Apply sunscreen with at least SPF 30 on the day of treatment and the following days to avoid irritation from direct sun exposure.

Do Hifu Machine Work

At beauty machines can be effective in firming loose skin. All skin types and body areas can be treated with skin tightening machines, but those with darker skin tones should use lower energy settings.

Best Hifu Machine Body

A good HIFU will cause some discomfort due to high energy and heat production for good results. Anesthetic cream is always used before surgery. Doctors may perform nerve blocks in people with a low pain threshold to reduce facial sensations. You will get the following healing effects:

Plastic surgery, especially the lower face
Firm skin
Reduce chin and smile lines
Brow lift

The HIFU machine is composed of a host machine and instrument hands (thermoplastic/private ultrasonic knife/gold microneedle/fine carving head). place the utensils on the rack so that they do not fall.

Contraindications For HIFU Machine Users

People with the following symptoms should use this device with caution, and please consult a doctor or professional before use, as detailed below:

1. It is forbidden for pregnant women and women during menstruation.

2. Those with severe heart disease, those with electronic devices such as pacemakers and automatic defibrillators implanted in their bodies.

3. Those with metal implants in the body should be cautious, and operations with implanted metal parts are prohibited.

4. Patients with malignant tumors, hemophiliacs or severe bleeding.

5. Patients with serious diseases, skin diseases and infectious diseases should use it with caution.
6. Patients with hyperthyroidism, asthma, patients with severe three highs (hypertension, hyperglycemia, hyperlipidemia), and cancer patients are prohibited.

7. Those who suffer from severe anemia or have severe allergic reactions are prohibited.

8. People who have taken oral isotretinoin treatment (Accutane / Roaccutane / Oratane) in the past 9 months.

9. Patients who are ill should also use this instrument with caution, unless they are authorized by a doctor.

10. Do not operate the injection or filling site within 30 days, and the specific time should be determined according to the actual situation of the customer.

11. It is forbidden to operate on the following parts: heart, brain, neck nerve center, spine, eyeball, wound, bleeding place, injection wound.

User Care After Operation

1. Please eat lightly after use, avoid spicy food.

2. After use, do not wash your face with hot water or cold water (no more than 35 degrees) within one week.

3. Within a week, apply a repairing hydrating mask every day, paying attention to moisturizing, hydrating and sunscreen.

4. Do not massage the face within two weeks after use to avoid the skin being squeezed and affecting the effect.

5. Do not stay in a high-temperature and high-humidity environment within two weeks after use, such as sauna, hot yoga, face steaming, etc.

6. Do not use radio frequency and laser instruments within one month.

7. Pay attention to sun protection within one month and avoid exposure to the sun.

8. It is forbidden to use products containing fruit acids and peeling products, and daily use of moisturizing essence and cream.

9. People with poor metabolism, or people who have received fillings, injections, and freckle removal before, may experience redness, swelling, rashes, and blackening in a short period of time. These are normal phenomena and will subside on their own within 3-7 days. Some people last about a week.

10. The second operation time is 1-3 months. The specific time is determined according to the skin aging condition. The deeper the aging degree, the shorter the second operation time will be.

11. In order to achieve a better state after the operation, it is necessary to do a good job of repairing, nutrition and water supplement after the above operation, so as to avoid the situation of unsatisfactory effect and short duration due to neglect of care and repair after operation.

Instrument Maintenance and Maintenance

1. Before using the instrument, it must be confirmed that the plug of the grounding wire is used. When using it, ensure that the power socket of the instrument is truly grounded.

2. If the local power supply voltage is unstable, in order to ensure that the voltage of the instrument is suitable, we recommend that the user add a regulated power supply with matching power.

3. In order to ensure the normal service life and effect of the equipment, please use the specified accessories provided or recommended by the original manufacturer uniformly.

4. Do not place the instrument in a humid place or near a water source, and do not expose the instrument to direct sunlight. Please store the instrument in a dry and cool place.

5. Do not place the instrument close to a strong heat source, which may affect the life and normal use of the instrument.

6. After each use, please wipe the surface of the instrument with a wrung wet cloth, and disinfect the handle probe with alcohol. After disinfection, keep the probe properly to avoid damage to the black film on the probe.

7. During daily use, maintenance, and care, avoid water, oil and other media from penetrating into the instrument, and do not hit or hit the instrument with sharp or heavy objects, so as not to damage the instrument.

8. When the instrument is not in use, please turn off the power switch and main switch of the instrument, and disconnect the power supply. Do not touch the power switch with wet hands to ensure the safety of electricity use.